MM5 -
ROLLER WELDER FOR CYLINDRICAL FILTERS OF WIRE CLOTH.
|
| 
|
|
Roll welding
of net or metallic cloth filters
|
THE PRECALENDERED FILTER IS
PLACED ON THE FIXED PIVOT/ELECTRODE BY HAND.
3 PNEUMATIC UNITS (2 LATERAL UNITS AND 1 LOWER UNIT) BLOCK
THE FILTER BY PUTTING IT IN CONTACT WITH THE PIVOT, AND THUS
FIXING THE FINAL DIAMETER
|
|
| THE UPPER ROLLER, ASSEMBLED ON A CONTROLLED AXLE
MOTORIZED SLIDE, TACK WELDS SOME SECTIONS AND AFTERWARDS THE
COMPLETE WELDING CONTINUES |
|
AT THE END OF THE WELDING PROCESS,
THE FILTER IS AUTOMATICALLY UNLOADED.
THE PIVOT/ELECTRODE IS INTERCHANGEABLE, SO IT CAN PROCESS DIFFERENT
DIAMETERS.
IT IS POSSIBLE TO ELECTRONICALLY SET THE FILTER LENGTH AND THE
NUMBER OF TACK WELDS
|
| |
