|
The operator loads the 6 reels on to the winding machine and
unloads the wound spools positioning them on mobile pallets
from the line
 |
The completed pallets of reels are then conveyed to
the bending station.
The choice of working reel is set by code on the operating
panel which enables/disenables the necessary stations.
|
The next station is for welding with inverter
technology. During the operation checking involves selecting
the rejects which are removed before the reels are placed
in the crate.
A further ohmic resistance test is carried out before the
reel is unloaded.
SOLDERING STATION
The line is formed of two flanking conveyor
belts where about 20 pallets are in movement.
UNLOADING STATION
The unloading station consists of a storage of empty crates
which are automatically removed from the system when they
are full and deposited one on top of another on a trolley
which when full can be taken away by an operator and transported
on other lines and another trolley is put in place.
A controller with pincers on a controlled axis takes the worked
reels from the lines and deposits them in the crates.
The reels which are marked as rejects are unloaded in another
crate which is positioned between the pallet and the storage.
The line therefore consists of:
WINDING MACHINE, BENDING STATION, SOLDERING STATION, CHECKING
STATION AND UNLOADING STATION, it is about 5 m long and
2 m wide.
|
