|
|
|
| Detail of the loading
station of the contact insert |
Loading station of
the silver plate, with selection of the part with brasant |
Loading station of
the "C"-shaped iron |
|
|
Finished items |
| |
|
|
|
|
|
The loading stations
are built with manipulators and pliers produced by us,
and in every station the effective loading of the items
is checked through special sensors. |
Special care is given
to the template design and construction, to guarantee
the required dimensions and tolerance |
| |
|
|
|
Swivel desk machine with 8 stations, with a productivity
of approx. 15 pieces/minute. The vibrators are equipped
with hoppers, to avoid an overload of the vibrating
part, to have a constant load and still guarantee
reasonable autonomy.
Beyond the control of the welding parameters, the
compression of the silver plate is also kept under
control.
|
|
|
|
The discharge of the
finished piece takes place automatically and the discard
is selected directly on the chute. |
It is possible to
set the maximum number of tolerable discards, to avoid
that the machine continues producing unsuitable pieces. |
| |
|
|
|
The welding head is the PAT 4 model
with double handling of both the lower electrode as
well as the upper electrode. |
|
|
|
The welding is executed with an inverter of 1 KHz and
a transformer of 15 KA, with constant current control. |
| |
|
